现如今近几年很多地方都购买使用彩钢板作为建筑材料，比如厂房，仓库等等。济南彩钢板是我们生活中比较常见的一种板材，被应用在各种场合，但是彩钢板对施工环境也是有严格要求的。今天厂家为大家分析一下彩钢板安装期间的一般说明。

Nowadays, in recent years, many places have purchased and used color steel plates as building materials, such as factories, warehouses, and so on. Jinan color steel plate is a common type of plate in our daily life, which is used in various occasions. However, color steel plate also has strict requirements for the construction environment. Today, the manufacturer will analyze the general instructions during the installation of color steel plates for everyone.

1、安装前对净化区域的风管、场地进行清扫，场地内一切与施工无关的物品。

1. Before installation, clean the air ducts and site in the purification area, and remove all items unrelated to construction from the site.

2、由承建方根据设计图纸做出具体二次设计，内容包括顶板排版图、顶板分解图、壁板排版图、壁板分解图及相关节点图，由双方确认后按照实际需要的规格订货。

2. The construction party shall make a specific secondary design based on the design drawings, including the roof layout diagram, roof breakdown diagram, wall panel layout diagram, wall panel breakdown diagram, and related node diagrams. After confirmation by both parties, orders shall be made according to the actual specifications required.

3、彩钢板出厂应采取保护措施贴膜，妥善包装，文明装卸，减少在运输过程中表面层受损坏。彩钢板及各类配件存放场地干燥清洁，平整坚实，有条件应在场地周围围起围护以便管理。彩钢板堆放应整齐划一，其堆放高度不得超过2.0米。

3. Protective measures should be taken when leaving the factory for color steel plates, such as film application, proper packaging, civilized loading and unloading, to reduce surface layer damage during transportation. The storage area for color steel plates and various accessories should be dry, clean, flat, and solid. If possible, enclosures should be placed around the site for easy management. Color steel plates should be stacked neatly and uniformly, and their stacking height should not exceed 2.0 meters.

4、济南彩钢板运到现场后，应出具产品合格证及相关证件，做好报验手续。夹芯板表面不应有划伤，其几何尺寸应符合设计图纸要求，如有划痕，保护膜去除后有承建方作技术处理。

4. After the Jinan color steel plate is transported to the site, a product qualification certificate and relevant documents should be issued, and the inspection procedures should be completed. The surface of the sandwich panel should not be scratched, and its geometric dimensions should meet the requirements of the design drawings. If there are scratches, the protective film should be removed and the contractor should perform technical treatment.

5、安装过程中不撕下壁板表面塑料保护膜，禁止撞击和踩踏板面。配件和各种材料应严格检查其规格、性能和完好程度，不合格或已损坏的配件严禁使用。

5. During installation, do not remove the plastic protective film on the surface of the wall panel, and do not hit or step on the pedal surface. Accessories and various materials should be strictly inspected for their specifications, performance, and completeness. Unqualified or damaged accessories are strictly prohibited from use.

6、洁净区内所有安装缝隙都应用硅胶作密封处理，打胶之前，安装缝隙严格清洗，除去杂质和油污，确保粘贴密实，防落和积灰。硅胶表面应整光滑，不能出现皱皮现象。

6. All installation gaps in the clean area should be sealed with silicone. Before applying glue, the installation gaps should be strictly cleaned to remove impurities and oil stains, ensure dense adhesion, and prevent detachment and dust accumulation. The surface of silicone should be smooth and free from wrinkling.

7、每天施工结束后需对场地进行清理打扫，做到每天工完料净，场地清洁。

7. After the completion of construction every day, the site needs to be cleaned and cleaned to ensure that the materials are clean and the site is clean.

注意，彩钢板的安装，应在建筑装饰工程基本完工以及通风、动力电、工艺主管的主体部完工后进行。在安装过程中切割机等机械及安装配件和施工场地应随时清扫，擦试干净。按安装顺序为先安装壁板后安装顶板。更多相关事项就来我们网站http://sxhtyz.com咨询！

Note that the installation of color steel plates should be carried out after the basic completion of the building decoration project and the completion of the main departments of ventilation, power, and process supervisors. During the installation process, machinery such as cutting machines, installation accessories, and construction sites should be cleaned and wiped clean at all times. Install the wall panel first and then the top plate according to the installation sequence. For more related matters, come to our website http://sxhtyz.com consulting service