现阶段，C型钢连接前钢的主要产品之一。它立即使用于各个领域，以生产和生活不受其影响。到现在为止，人们挑选C型钢主要是因为C型钢的质量问题，以降低挑选劣质钢的可能性。下面济南C型钢厂来讲讲C型钢连接片生产加工时的注意事项。

At present, one of the main products of C-shaped steel before connection is steel. It is immediately used in various fields to ensure that production and daily life are not affected by it. So far, people have chosen C-shaped steel mainly because of its quality issues, in order to reduce the possibility of selecting inferior steel. Below, Jinan C-shaped Steel Factory will explain the precautions during the production and processing of C-shaped steel connecting pieces.

流程1：进料

Process 1: Feeding

送料是将生产C型钢所需的材料放入对应的送料机中，将材料传对应的生产设备中，生产出的C型钢。送料是生产C型钢连接件的前提，立即影响后续加工工艺。因而，在卸料过程中，应挑选原材料，以C型钢的质量不受影响。

Feeding is the process of placing the materials required for the production of C-shaped steel into the corresponding feeding machine, transferring the materials to the corresponding production equipment, and producing the C-shaped steel. Feeding is a prerequisite for producing C-shaped steel connectors, which immediately affects the subsequent processing technology. Therefore, during the unloading process, raw materials should be selected to ensure that the quality of C-shaped steel is not affected.

过程2：成型

Process 2: Forming

成型是C型钢连接件生产的关键环节。由于成型意味着C型钢的形态已经出现，可以后续加工立即作用于成型钢，进而进一步提升其性能。

Forming is a key link in the production of C-shaped steel connectors. Due to the fact that forming means that the shape of C-shaped steel has already appeared, subsequent processing can immediately act on the formed steel, further improving its performance.

过程3：切断

Process 3: Cut off

C型钢连接件经别的环节加工后，具备本身性能，可依据实际效果切断，C型钢在各个领域的使用。

After being processed in other stages, C-shaped steel connectors have their own performance and can be cut according to actual effects. C-shaped steel is widely used in various fields.

细节一：钢表层

Detail 1: Steel surface layer

C型钢表层为无凹坑或颗粒的镜子。若发生这样的事情，表明所用材料中杂质较多，立即影响C型钢的质量。因而，人们不能挑选C型钢连接器，否则会造成各种各样使用故障，增加生产成本。

The surface of C-shaped steel is a mirror without pits or particles. If such an event occurs, it indicates that there are many impurities in the material used, which immediately affects the quality of C-shaped steel. Therefore, people cannot choose C-type steel connectors, otherwise it will cause various usage failures and increase production costs.

细节二：厚度

Detail 2: Thickness

人们在挑选C型钢时，需要依据实际需要挑选C型钢。由于C型钢的厚度立即影响其承载能力。在大型建筑中，当人们需要具备良好承载能力的C型钢时，必须挑选厚壁钢。如果选壁厚较薄的C型钢，则完全无法承受对应的重量，这将增加事故发生的可能性。

When people choose C-shaped steel, they need to choose C-shaped steel based on actual needs. Due to the immediate impact of the thickness of C-shaped steel on its load-bearing capacity. In large buildings, when people need C-shaped steel with good load-bearing capacity, they must choose thick walled steel. If C-shaped steel with thinner wall thickness is selected, it will be completely unable to bear the corresponding weight, which will increase the possibility of accidents.

只要我们注意以上c型钢厂家的小编介绍的两个细节，就可以实际效果不受影响。更多相关事项就来我们网站http://sxhtyz.com咨询！

As long as we pay attention to the two details introduced by the editor of the C-shaped steel manufacturer above, we can ensure that the actual effect is not affected. For more related matters, come to our website http://sxhtyz.com consulting service