大多数人可能都熟悉复合板的产品。因为本产品具有良好的隔热、保温、隔音、防潮等特点。而且它的应用范围也很广，我们应该更熟悉安装和施工。跟着济南复合板厂来简单了解一下施工技术：

Most people are probably familiar with composite board products. Because this product has good heat insulation, heat preservation, sound insulation, moisture-proof and other characteristics. And its application scope is also very wide, so we should be more familiar with installation and construction. Follow Jinan Composite Board Factory to briefly understand the construction technology:

1、根据复合板的尺寸在墙上用6钢膨胀螺栓固定卡(当复合板水平放置时，每块板有两块卡，当复合板垂直放置时，每块板有一块卡)。

1. Fix the clamps on the wall with 6 steel expansion bolts according to the size of the composite plate (when the composite plate is placed horizontally, each plate has two clamps, and when the composite plate is placed vertically, each plate has one clamp).

2、用粘结砂浆粘结，条形点粘;抹3~5厚抗裂砂浆，并压一层玻璃纤维网格布，确保牢固可靠。固定件的数量应根据设计说明书的要求进行设置。

2. Bond with bonding mortar, stick with strip point; Plaster 3-5 thick anti crack mortar and press a layer of glass fiber mesh cloth to ensure firm and reliable. The number of fasteners shall be set according to the requirements of the design specification.

3、抹底层聚合物砂浆：

3. Plastering polymer mortar for the bottom layer:

(1)用专用粘结剂制备聚合物砂浆。

(1) Polymer mortar is prepared with special adhesive.

(2)将准备好的聚合物砂浆均匀地铺在厚度为2mm的板上。

(2) Lay the prepared polymer mortar evenly on the 2mm thick plate.

4.压入网格布：

4. Press in grid cloth:

(1)网格布应按工作面的长度要求切割，并应留出搭接宽度。网格布应沿经度和纬度切割。

(1) The grid cloth shall be cut according to the length requirements of the working face, and the overlapping width shall be reserved. The grid cloth shall be cut along longitude and latitude.

(2)在门窗、洞口等四周网格布，四角应附一层网格布加强，整个网格布应在洞口四周加附加网格布。

(2) A layer of grid cloth shall be attached to the four corners of the grid cloth around the doors, windows, openings, etc., and the whole grid cloth shall be added around the openings.

(3)在洞口复合板的正面和侧面以及网格布的翻转处涂聚合物砂浆(只允许在此处的端边涂聚合物砂浆)。将预先甩出的网格布沿板的厚度方向转动，并将其压入聚合物砂浆中。

(3) Apply polymer mortar on the front and side of the hole composite plate and the overturned part of the grid cloth (only the end here is allowed to be coated with polymer mortar). Turn the pre thrown grid cloth along the thickness direction of the plate and press it into the polymer mortar.

此外在选择复合板的时候，尽量选择质量可靠、有可靠生产线的厂家进行选择，这样我们选择的产品质量才更加的可靠，在施工的时候一定要注意上面提到的这几点内容！关注我们http://sxhtyz.com，了解更多事项！

In addition, when selecting composite plates, try to select manufacturers with reliable quality and reliable production lines, so that the quality of products we choose will be more reliable. Pay attention to the above points during construction! Follow us http://sxhtyz.com , learn more!