彩钢板产品的基本应用广泛，对于产品的质量有着很高的要求，因此对于建造所需的板材一定要选择的基材，须保证产品的结实程度。要选择值得信赖的生产厂家，不能贪便宜。下面来讲讲济南彩钢板在使用时的基本注意事项。

Color steel plate products are widely used and have high requirements for the quality of products. Therefore, high-quality base materials must be selected for the plates required for construction to ensure the firmness of the products. We should choose reliable manufacturers and not be greedy. Here are the basic precautions for the use of Jinan color steel plate.

彩钢板运到现场后，应出具产品合格证及相关证件，做好报验手续。彩钢板表面不应有划伤，其几何尺寸应符合设计图纸要求，如有划痕，保护膜去除后有承建方作技术处理。

After the color steel plate is transported to the site, the product certificate and relevant certificates shall be issued and the inspection application procedures shall be completed. The surface of the color steel plate shall not be scratched, and its geometric dimension shall meet the requirements of the design drawings. If there are scratches, the Contractor shall conduct technical treatment after the protective film is removed.

安装过程中不撕下壁板表面塑料保护膜，禁止撞击和踩踏板面。配件和各种材料应严格检查其规格、性能和完好程度，不合格或已损坏的配件严禁使用。

During installation, the plastic protective film on the surface of the wall panel shall not be removed, and it is prohibited to impact and step on the pedal surface. The specification, performance and integrity of accessories and various materials shall be strictly checked. Unqualified or damaged accessories are strictly prohibited.

洁净区内所有安装缝隙都应用硅胶作密封处理，打胶之前，安装缝隙必须严格清洗，除去杂质和油污，确保粘贴密实，防落和积灰。硅胶表面应整光滑，不能出现皱皮现象。

All installation gaps in the clean area shall be sealed with silica gel. Before gluing, the installation gaps must be strictly cleaned to remove impurities and oil stains, ensure that the paste is dense and prevent falling off and dust accumulation. The surface of silica gel shall be smooth without wrinkle.

细立彩钢板壁板，按排版图装入预制好的组件，组件间以固定插件锁定相邻壁板。值得注意的是在组立壁板的同时配合好电气暗敷管线及箱盒。壁板应垂直，立缝要靠紧，缝隙越小越美观，立缝均匀。在操作时，仔细清理立缝上的保护膜暂时揭开，而千万不要揭除。清理槽内杂物及粘结的胶液凝固硬块。

Erect the color steel plate wallboard in a fine manner, and install the prefabricated components according to the layout drawing. Fix the adjacent wallboards with fixed inserts between the components. It is worth noting that the concealed electrical pipelines and boxes shall be well coordinated while the wall panels are assembled. The wallboard shall be vertical and the vertical joints shall be tight. The smaller the gap, the more beautiful it is. The vertical joints shall be uniform. During operation, the protective film on the vertical seam shall be carefully cleaned and temporarily removed, but never removed. Clean the sundries in the tank and the solidified hard blocks of the adhesive liquid.

在安装过程要对每一项进行严格的检查和现场考察，确认产品强度和稳定性满足建设要求，保证设备的结构，具有抗风性和抗震性以及一定的承载力。关注我们http://sxhtyz.com，了解更多！

During the installation process, strict inspection and site investigation shall be conducted for each item to confirm that the strength and stability of the product meet the construction requirements, ensure the structural safety of the equipment, and have wind resistance, seismic resistance and certain bearing capacity. Follow us http://sxhtyz.com Yes, learn more!