复合板实际上使用的优势有很多，比如独特的防水槽设计，有效防止雨水渗透，并避免了冷桥现象；多种外观效果，墙面美观。等等，下面济南复合板厂就来讲讲复合板施工应具备什么条件及问题。

The composite board has many advantages in practical use, such as the unique waterproof groove design, which can effectively prevent rainwater penetration and avoid cold bridge phenomenon; A variety of appearance effects, beautiful wall. Now, Jinan composite board factory will talk about the conditions and problems that composite board construction should have.

复合板施工应具备以下条件：

The composite plate construction shall meet the following conditions:

(1)基层墙体及其水泥砂浆找平层处理及预埋件安装完毕。

(1) The treatment of base course wall and its cement mortar leveling layer and the installation of embedded parts have been completed.

(2)必要的施工机具和劳防用品应已准备齐全。

(2) Necessary construction equipment and labor protection articles shall be prepared.

(3)施工脚手架应搭设牢固，检验合格。脚手架立杆与水平杆与墙面、墙角的间距应满足施工要求。

(3) The construction scaffold shall be firmly erected and qualified in safety inspection. The spacing between the vertical pole and horizontal pole of the scaffold and the wall surface and corner shall meet the construction requirements.

(4)基层墙体应坚实平整，表面干燥，不得有开裂，空鼓，松动或泛碱，水泥砂浆找平层的粘结强度，平整度及垂直度应符合(建筑装饰装修工程质量验收规范)GB50210中普通抹灰工程质量的要求。

(4) The base course wall shall be solid and flat, with dry surface, without cracking, hollowing, looseness or alkali. The bonding strength, flatness and perpendicularity of the cement mortar leveling layer shall meet the quality requirements of ordinary plastering works in gb50210 (code for quality acceptance of Building Decoration Engineering).

复合板施工常见问题

Common problems in composite plate construction

密度不够，导致抹面砂浆层开裂。外墙空鼓脱落施工中的失误、气温的影响等都有可能是外墙面砖出现问题的原因之一。空鼓、脱落的面砖除了让墙面外观不好看之外，也存在不少的隐患。

The density is insufficient, resulting in cracking of plastering mortar layer. The external wall hollowing out, the error in construction and the influence of temperature may be one of the reasons for the problems of the external wall tiles. Empty and falling face tiles not only make the wall look bad, but also have many hidden dangers.

原因：

reason:

外力因素：比如地基沉降不均造成墙体变形、错位，墙体面砖脱落，台风等极端天气也可能导致一些墙体问题。

External force factors: for example, uneven foundation settlement may cause wall deformation and dislocation, wall tiles fall off, and extreme weather such as typhoons may also cause some wall problems.

材料质量：复合墙体由于各层的材料不相容、不协调，导致面砖产生位移，外墙的防水措施没有做到位，导致水分渗入，造成面砖粘接层破坏。保温板饰面拥有点缀灰浆等轻质功能性涂层或有杰出透气性的水性外墙涂层。

Material quality: due to the incompatibility and incongruity of the materials of each layer of the composite wall, the face bricks are displaced, and the waterproof measures of the external wall are not in place, which leads to the infiltration of water and the destruction of the adhesive layer of the face bricks. The thermal insulation board has light functional coating such as decorative mortar or water-based exterior wall coating with excellent air permeability.

气温变化：不同季节和昼夜的温差变化，使得饰面砖受到影响，饰面层会产生局部应力集中在纵横墙体上，若是在大面积墙面中部，或者相邻面砖的局部，面砖就会脱落。

Temperature change: the temperature difference between different seasons and day and night will affect the facing bricks. The local stress of the facing layer will be concentrated on the vertical and horizontal walls. If it is in the middle of a large area of the wall or in the part of the adjacent facing bricks, the facing bricks will fall off.

采购人员在选购材料的时候，选购的标准也在提高，不仅重视材料的使用特性，也很注重老化速度的问题。因为市场上的大部分装修材料，老化的速度很快，在使用几年之后，就需要再次进行装修更换。如果您有需求就来我们网站http://sxhtyz.com进行咨询了解吧。

When purchasing materials, the purchasing standards are also improving. They not only pay attention to the use characteristics of materials, but also pay attention to the aging speed. Because most of the decoration materials in the market are aging rapidly, after several years of use, they need to be renovated and replaced again. If you have any need, please come to our website http://sxhtyz.com Consult and understand.