Jinan C-section steel is a kind of plate with high strength. It is formed by cold bending and rolling, and the raw material is new steel with high strength. Therefore, compared with the traditional plate, the produced C-section steel has greater advantages. Do you know what the processing process of C-section steel is? What problems will you encounter during processing

镀锌C型钢是一种采用高强度钢板，冷弯滚压成型，壁厚均匀，截面性能优良，强度高的新型钢材。与传统热轧相比，同等强度可节约材料。由于镀锌型钢的特性，它被广泛应用于钢结构建筑的檩条和墙梁，也可组合成轻型屋架、支架和其他建筑构件。此外，还可用于机械轻工制造中的立柱、横梁、手臂等。

Galvanized C-section steel is a new type of steel with high-strength steel plate, cold bending and rolling forming, uniform wall thickness, excellent section performance and high strength. Compared with traditional hot rolling, the same strength can save materials. Due to the characteristics of galvanized section steel, it is widely used in purlins and wall beams of steel structure buildings, and can also be combined into light roof truss, support and other building components. In addition, it can also be used for columns, beams, arms, etc. in mechanical and light industry manufacturing.

那么镀锌C型钢是怎么生产出来的呢？镀锌C型钢广泛用于建筑构件，所以在制造过程中也非常严格。以前做的时候一条生产线要几个人，费时费力。随着科学技术的发展，钢厂的机械设备也发生了变化。镀锌c型钢的加工也实现了自动化。

So how is galvanized C-section steel produced? Galvanized C-section steel is widely used in building components, so it is also very strict in the manufacturing process. In the past, a production line required several people, which was time-consuming and laborious. With the development of science and technology, the mechanical equipment of steel mills has also changed. The processing of galvanized C-section steel has also realized automation.

济南C型钢

Jinan C-section steel

一、济南C型钢的加工流程

1、 Processing flow of Jinan C-section steel

放料①——矫平②——成型③——定型④——矫直⑤——测长⑥——冲拉筋圆孔⑦——冲椭圆连接孔⑧——成型切断⑨

Discharging ① - leveling ② - forming ③ - setting ④ - straightening ⑤ - length measurement ⑥ - punching the round hole of tie bar ⑦ - punching the elliptical connecting hole ⑧ - forming and cutting ⑨

c型钢采用热卷板冷弯成型，壁薄，重量轻，截面性能优良，强度高。与传统槽钢相比，同等强度可节省材料。通过以上介绍，镀锌C型钢具有尺寸可调、抗压强度高的优点。冷弯成型型钢虽然截面尺寸较轻，但与屋面檩条的受力特点非常吻合，充分利用了钢材的力学效率。各种配件也可以连接成不同的组合，外形美观。型钢檩条的使用可以减轻建筑屋面的重量，减少工程用钢量，因此也被称为经济、是替代槽钢、角钢、钢管等传统型钢檩条的新型建筑材料。

C-section steel is formed by cold bending of hot coil, with thin wall, light weight, excellent section performance and high strength. Compared with traditional channel steel, the same strength can save materials. Through the above introduction, galvanized C-section steel has the advantages of adjustable size and high compressive strength. Although the section size of cold-formed section steel is light, it is very consistent with the stress characteristics of roof purlin and makes full use of the mechanical efficiency of steel. Various accessories can also be connected into different combinations with beautiful appearance. The use of section steel purlin can reduce the weight of building roof and reduce the amount of steel used in engineering. Therefore, it is also known as economic and new building material to replace traditional section steel purlin such as channel steel, angle steel and steel pipe.

镀锌C型钢表面光滑，锌层均匀，附着力强，尺寸精度高。所有表面均被锌层包裹，表面锌含量通常为120-275克/。使用寿命长，耐腐蚀，经久耐用，是一种防护较强的镀锌C型钢。

Galvanized C-section steel has smooth surface, uniform zinc layer, strong adhesion and high dimensional accuracy. All surfaces are coated with zinc layer, and the surface zinc content is usually 120-275 g /. It has long service life, corrosion resistance and durability. It is a kind of galvanized C-section steel with strong protection.

抗震支撑c形钢

Seismic support C-shaped steel

我们的抗震支吊架所用的C型钢，一般都是镀锌的产品，涂层厚度符合规范要求，耐腐蚀性高。因此，在建筑中使用抗震支吊架，使用寿命更长。

The C-section steel used for our seismic supports and hangers is generally galvanized products, the coating thickness meets the requirements of national specifications and has high corrosion resistance. Therefore, the use of seismic supports and hangers in buildings has a longer service life.

济南C型钢

Jinan C-section steel

二、济南c型钢加工中三个常见问题的解决方法

2、 Solutions to three common problems in Jinan C-section steel processing

1.c形钢的小侧向运行角度偏移：通过调整进料端的夹送辊来调整。如果左侧的小侧较大，则松开左端的夹送辊，并拧紧右端的夹送辊。

1. Small lateral running angle offset of C-shaped steel: it can be adjusted by adjusting the pinch roll at the feed end. If the small side on the left side is large, loosen the pinch roll on the left end and tighten the pinch roll on the right end.

2.C型钢横向弯曲：当C型钢弯曲到左端时，松开出料端第2排的左压辊，拧紧右压辊。

2. Transverse bending of C-section steel: when C-section steel is bent to the left end, loosen the left pressure roller in the second row at the discharge end and tighten the right pressure roller.

3.C型钢纵向弯曲：当C型钢向上弯曲时，向下压一排矫直轴，向下弯曲时，向上推第2排矫直轴。

3. Longitudinal bending of C-section steel: when C-section steel bends upward, press down a row of straightening shafts, and when bending downward, push up the second row of straightening shafts.

本文的精彩内容由济南C型钢厂知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://sxhtyz.com我们有专门的客服为您解答问题

The wonderful content of this article is provided by the knowledge of Jinan C-section steel plant. There are many wonderful contents on this website. You can click to enter more contents: http://sxhtyz.com We have special customer service to answer your questions