彩钢瓦的铺设施工不仅仅是简单的安装操作，它还需要多加注意各种连接和紧固数量这一方面的要求，从而才能更好的安装瓦。那么该材料各种连接和紧固数量要求是什么呢？我们一起来看看吧。

The laying construction of color steel tile is not only a simple installation operation, it also needs to pay more attention to the requirements of various connections and fastening quantity, so as to better install the tile. So what are the requirements of various connection and fastening quantity of this material? Let's have a look.

彩钢瓦钢架或屋架、檩条和屋面板作为瓦屋面重要的组成部分。

Color steel tile steel frame or roof truss, purlin and roof panel are important parts of tile roof.

安装方式与钢架或屋架、檩条和屋面板的承重直接有重要关系。

The installation method is directly related to the bearing capacity of steel frame or roof truss, purlin and roof panel.

彩钢瓦各种连接件、紧固件的数量和尺寸可通过静力计算分析和设计构造求得。

The quantity and size of various connectors and fasteners of color steel tile can be obtained through static calculation analysis and design structure.

1）钢架或屋架、檩条均能满足设计要求且屋面板钢度较大时，这种方式是比较合理的安装条件，光伏支架采用连接件与屋面板连接，并尽可能靠近檩条位置固定。

1) When the steel frame or roof truss and purlin can meet the design requirements and the roof panel is of high rigidity, this is a reasonable installation condition. The photovoltaic support is connected with the roof panel by connectors and fixed as close to the purlin as possible.

2）钢架或屋架、檩条均能满足设计要求，但屋面板钢度较小，变形较大时，这种类型的彩钢瓦屋顶主要表现为车棚、公交候车厅、养殖场等一些要求程度不太高的场所。彩钢瓦光伏支架可采用连接件直接与檩条处的屋面板直接连接方式，也可以采用连接件与檩条通过穿透屋面板的方式进行连接。

2) The steel frame or roof truss and purlin can meet the design requirements, but when the steel degree of the roof panel is small and the deformation is large, this type of colored steel tile roof is mainly used in some places with low requirements, such as car shed, bus waiting hall, breeding farm, etc. The photovoltaic support of color steel tile can be directly connected with the roof panel at the purlin by the connector, or can be connected with the purlin through the roof panel by the connector.

3）仅钢架或屋架能满足设计要求，檩条及屋面板承载能力较小时，此种布置方式，采用连接件与钢架或屋架连接，具体连接安装方式同支架与檩条穿透屋面板连接方式。

3) Only the steel frame or roof truss can meet the design requirements, and the bearing capacity of purlin and roof panel is small. In this arrangement, the connector is used to connect with the steel frame or roof truss, and the specific connection and installation method is the same as that of the support and purlin penetrating through the roof panel.

4）还有一种连接方式为将固定支架的位置屋面板割开，通过型钢柱连接到屋面钢梁上。

4) Another connection method is to cut the roof panel at the position of the fixed support and connect it to the roof steel beam through the steel column.

因此以上就是关于彩钢瓦各种连接和紧固数量的要求内容了，从而大家在施工铺设该材料的时候，一定要多加注意这一方面的问题，按照正确的方法步骤和相关要求进行施工，才能更好的确保施工质量。

Therefore, the above is about the requirements of various connection and fastening quantity of color steel tile, so when we lay the material in construction, we must pay more attention to this aspect, and carry out the construction according to the correct method steps and relevant requirements, so as to better ensure the construction quality.