Speaking of Jinan color steel tile, I think we are very familiar with it. In our life, color steel tile is widely used. However, the transportation of color steel tile is a difficult problem, in the transportation process will also produce certain wear. Next, Jinan color steel tile factory will take you to understand the wear of color steel tile in the transportation process, hoping to help you!

1、便是对车子的规定，针对应用的运送货品的车子，需要采用应依据机房墙板的规格型号规格类型来挑选适合的运送车辆类型，一般采用大中型的专用型托车运送。

1. First of all, there are regulations on vehicles. For the vehicles used to transport goods, it is necessary to select the appropriate type of transport vehicles according to the specifications, models and types of the wall panels in the machine room. Generally, large and medium-sized special trucks are used for transportation.

2、彩钢瓦板墙在装货时，应提早将机房墙板和零配件按型号规格类型等标准散装好，而且要捆缚坚固平稳以避免金属材料面被损坏或刮伤。

2. When loading the color steel tile wall, the wall panel and spare parts of the machine room should be packed in bulk according to the model, specification and type standards, and the binding should be firm and stable to avoid damage or scratch of the metal material surface.

3、在运送全过程中应将机房墙板平稳坚固的捆扎汽车上，而且应应用木楔子等临时性固定不动的对策来防止因车体摇晃所造成的松脱和挤压成型形变等状况的产生，进而减少济南彩钢瓦金属表层损坏或刮伤的概率，另外应留意运送板才的高宽比是不是超过了托车的长短，而且要开展相对的避免坍塌工作中。

3. In the whole process of transportation, the wall panel of the machine room should be tied up on the vehicle stably and firmly, and the temporary fixed measures such as wooden wedge should be applied to prevent the loosening and extrusion deformation caused by the car body shaking, so as to reduce the probability of damage or scratch on the metal surface of Jinan color steel tile. In addition, it should be noted whether the height width ratio of the transport plate exceeds that of the trolley And to carry out the relative work to avoid collapse.

4、开展将机房墙板捆扎汽车上的工作中时，采用同样板长的角铁或是角钢置放在高层机房墙板两侧的拐角处，那样可匀称分派绳子绑扎的工作压力，具有防止工作压力集中化而毁坏压磨(压凹)机房墙板的边沿。假如长距离运送或实时路况不佳运送时，则规定金属材料面机房墙板选用水准置放的方式 。

4. In the work of bundling the machine room wallboard on the car, the angle iron or angle steel with the same plate length is placed at the corner on both sides of the wall panel of the high-rise machine room, so as to evenly distribute the working pressure of the rope binding, and prevent the edge of the grinding machine room wall panel from being destroyed due to the concentration of the working pressure. If the long-distance transportation or real-time road conditions are not good, it is required that the metal material surface machine room wallboard should be placed horizontally.

5、彩钢瓦在重型直升机房专用型墙壁厚钢板时，钢面板墙的支撑点处挑出来长短不适合超过1、0米，以保证原材料不容易形变损坏。

5. When the color steel tile is used in the special wall thick steel plate of the heavy lift machine room, the length of the support point of the steel panel wall is not suitable for more than 1 or 0 meters, so as to ensure that the raw materials are not easy to be deformed and damaged.

若有超出两米之上的板墙时，挑出来相对的板才并在其在尾端总体绑扎好，以防止因小车尾端的波震导致过大刚度面毁坏主机房的板墙。

If there is a board wall over two meters above, the opposite plate shall be picked out and bound at the tail end to prevent damage to the panel wall of the main machine room due to the wave vibration at the tail end of the car.

6、彩钢瓦运送板才时要两边另外伸出，以防毁坏表层空气氧化膜或镀层。

6. When the color steel tile is transported, both sides should be extended separately to prevent the surface air oxide film or coating from being damaged.

以上就是济南彩钢瓦厂家整理的几点关于济南彩钢瓦在运输过程中产生的磨损，相信通过本文的描述，你能够对彩钢瓦有一定的认识和了解，希望以上内容能帮助到你。另外，若你想要了解更多相关资讯，可以多多关注我们的网站动态。

The above is Jinan color steel tile factory finishing a few points about Jinan color steel tile in the process of transportation wear, I believe that through this description, you can have a certain understanding and understanding of color steel tile, hope the above content can help you. In addition, if you want to know more about it, you can pay more attention to our website.