Through the previous introduction, I believe that you are familiar with the sandwich panel. Because of its advantages, the use of sandwich panel is becoming more and more popular, and more and more customers purchase sandwich panel. But do you know what problems need to be noted in the transportation process of sandwich panel? The staff of xiamianji Nancai steel plate factory will give you a brief introduction.

运输夹芯板的车辆选用应根据机房墙板的规格尺寸种类来选择合适的运输车辆型号。一般选用大型的专用拖车运输。

The selection of vehicles for transporting the sandwich panel shall be based on the specification and size of the wall panel in the machine room. Generally, large special trailers are used for transportation.

运输夹芯板都有哪些问题要注意?

What problems should be paid attention to when transporting sandwich panels?

夹芯板墙板在装车时，应提前将机房墙板和配件按型号种类等条件分装好，并且要捆绑牢固稳定以防止金属面被磨损或划伤。

When loading the sandwich panel wall panel, the wall panel and accessories of the machine room shall be separately assembled in advance according to the model, type and other conditions, and shall be bound firmly and stably to prevent the metal surface from being worn or scratched.

夹芯板在运输过程中应将机房墙板稳定牢固的绑扎在车上，并且应使用木楔等临时固定的措施来避免因车身晃动所引起的松动和挤压变形等现象的发生，从而降低金属表面磨损或划伤的几率。

During the transportation of the sandwich panel, the wall panel of the machine room shall be stably and firmly bound on the vehicle, and temporary fixing measures such as wooden wedges shall be used to avoid the looseness and extrusion deformation caused by the shaking of the vehicle body, so as to reduce the probability of metal surface wear or scratch.

夹芯板当运输板材时，应注意运输板材的高度是否出了拖车的长度，并且要进行相应的防止倾覆工作。

When transporting the sandwich panel, pay attention to whether the height of the transport panel exceeds the length of the trailer, and carry out the corresponding anti overturning work.

夹芯板绑扎在车上的工作时，选用同等板长的角钢或者角铁放置在机房墙板两边的转角处，这样可均匀分配绳索捆扎的压力，起到避免压力集中而损坏压磨(压凹)机房墙板的边缘。

When the sandwich board is bound to the car, angle steel or angle iron of the same board length shall be placed at the corner of both sides of the wall board of the top machine room, so as to evenly distribute the pressure of rope binding, so as to avoid damaging the edge of the wall board of the machine room by grinding (concave pressing) due to the pressure concentration.

以上为大家介绍的就是夹芯板的相关内容，希望能够对大家有所帮助。

The above is the introduction of sandwich panel related content, I hope to be able to help you.